Flashings & Tapes

Black

Peel & Stick Flashing 

GenTite Peel & Stick Flashing is designed to field fabricate a watertight seal around pipes, inside and outside corners, curbs and other roof details and penetrations.
Available in these sizes:
9″ x 25′ Roll
Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product

 

Peel & Stick Corner 

GenTite Peel & Stick Corners are pre-cut (8.5″ diameter) to make flashing an inside or outside corner quick and simple. May also be used for small repairs or patches.
Available in these sizes:
8.5″ diameter Corner
Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Seam Tape 

GenTite Peel & Stick Seam Tape is used to attach membrane panels together for a high-strength, weather resistant seam.
Available in these sizes:
3″ x 50′ Roll
Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetProduct Data Sheet
for this Product
Peel & Stick Cover Tape 

 

GenTite Peel & Stick Cover Tape is used to cover field seams and edge metal details.
Available in these sizes:
6″ x 50′ Roll

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetProduct Data Sheet
for this Product

Peel & Stick Pipe Boot 

 

Pre-fabricated GenTite Peel & Stick Pipe Boots are designed to cover round penetrations found on the roof. Fits 1″ to 6″ pipes and can withstand intermittent temperatures up to 180˚ F.
Available in these sizes:
1″ to 6″ Boot

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Penetration Pocket 

 

Pre-fabricated GenTite Peel & Stick Penetration Pockets are designed to flash angular penetrations. May also be used where round penetrations are not accessible from the top. Includes a rigid polyethylene ring that is expandable up to 3″.
Available in these sizes:
6″ diameter Pocket

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick RPS 

 

GenTite Peel & Stick RPS (Reinforced Perimeter Strip) is designed to be used with GenTite Membrane Screw w/ Plate to secure areas of the roof that are exposed to high wind forces such as corners, curbs and walls.
Available in these sizes:
6″ x 50′ Roll

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product

White

Peel & Stick Flashing 

 

GenTite Peel & Stick Flashing is designed to field fabricate a watertight seal around pipes, inside and outside corners, curbs and other roof details and penetrations.
Available in these sizes:
12″ x 25′ Roll

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetProduct Data Sheet
for this Product
Peel & Stick Corner 

 

GenTite Peel & Stick Corners are pre-cut (8.5″ diameter) to make flashing an inside or outside corner quick and simple. May also be used for small repairs or patches.
Available in these sizes:
8.5″ diameter Corner

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Seam Tape 

 

GenTite Peel & Stick Seam Tape is used to attach membrane panels together for a high-strength, weather resistant seam.
Available in these sizes:
3″ x 50′ Roll

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Cover Tape 

 

GenTite Peel & Stick Cover Tape is used to cover field seams and edge metal details.
Available in these sizes:
6″ x 50′ Roll

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Pipe Boot 

 

Pre-fabricated GenTite Peel & Stick Pipe Boots are designed to cover round penetrations found on the roof. Fits 1″ to 6″ pipes and can withstand temperatures up to 180˚ F.
Available in these sizes:
1″ to 6″ Boot

 

 

Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product
Peel & Stick Penetration Pocket 

Pre-fabricated GenTite Peel & Stick Penetration Pockets are designed to flash angular penetrations. May also be used where round penetrations are not accessible from the top. Includes a rigid polyethylene ring that is expandable up to 3″.
Available in these sizes:
6″ diameter Pocket
Download a Product Spec SheetSDS Sheet
for this Product
Download a MSDS SheetData Sheet
for this Product